Keyboard controls
Keyboard commands act on the selected node or on the device connected to the selected channel.
They are ignored while a text field or control has focus. Press ? at any time to open the same
reference inside the app.
| Keys | Action |
|---|---|
| Left / Right | Tune down or up one step |
| Shift + Left / Right | Tune ten steps |
[ / ] | Choose a smaller or larger tuning step |
f | Focus the device dial; press Enter to type a frequency |
, / . | Select the previous or next channel |
m / M | Cycle the selected channel’s analog mode forward or backward |
- / + or = | Lower or raise squelch by 2 dB |
s | Toggle squelch |
1–9 | Select the nth node in the patch |
p | Pin or unpin the selected node on the rack |
v | Switch between Patch and Rack |
Ctrl/⌘ Z | Undo the last workspace change, for every connected client |
Ctrl/⌘ Shift Z or Ctrl/⌘ Y | Redo |
Ctrl/⌘ C | Copy the selected nodes and the wires between them |
Ctrl/⌘ V | Paste them beside the originals |
| Backspace | Delete the selected node or wire |
? | Open the keyboard reference |
| Escape | Close an overlay or menu |
Dial controls
Once the frequency dial has focus:
- Left and Right choose a digit.
- Up and Down change the selected digit.
- Page Up and Page Down change the next larger place.
- Home and End jump to the first or last place.
- Enter opens direct frequency entry.
Click a Device node before using the mouse wheel on its dial. This prevents a wheel gesture from retuning the receiver when you intended to pan the canvas.